MEWP Inspections & Certification
"MEWP" — mobile elevating work platform — is the international term for what most Australian operators simply call an EWP or elevated work platform. If your organisation works to ISO or ANSI standards, or you manage a national or multinational fleet, you will see MEWP used in your asset registers, procedures and audits. This page maps that international terminology onto Australian compliance practice, so a fleet defined in MEWP terms can be inspected and certified correctly under the Australian regime without anything getting lost in translation.
The practical point is that the machine is the same whatever it is called — a boom lift, scissor lift, vertical mast lift or truck-mounted platform. What changes across regions is the standards framework and the terminology. In Australia, these machines are designed to AS/NZS 1418.10 and used, maintained and inspected under AS 2550.10, part of the broader AS 2550 series. We inspect and certify your MEWP fleet to that Australian framework while keeping the documentation legible to a head office or asset system that thinks in ISO/ANSI MEWP categories.
Built For
- National and multinational fleet owners using MEWP/ISO/ANSI terminology
- Head-office asset managers standardising records across regions
- Rental and hire businesses with internationally sourced fleets
- EHS and compliance teams reconciling ISO/ANSI practice with Australian standards
- Contractors mobilising imported MEWPs onto Australian sites
Equipment & Coverage
- Boom-type MEWPs (Group B) — telescopic and articulating
- Vertical MEWPs (Group A) — scissor and vertical mast lifts
- Truck-mounted MEWPs and vehicle-mounted platforms
- Spider and tracked MEWPs
- Insulated MEWPs used near live apparatus
The Process
Map terminology to standards
We translate your MEWP classifications and asset register into the Australian framework, confirming how each unit is treated under AS 2550.10 and AS/NZS 1418.10 so nothing is misclassified. This step removes the ambiguity that creeps in when an overseas classification is assumed to carry over unchanged.
Schedule the fleet
Across a national fleet we map each unit's inspection and testing due dates, so routine, annual and major-interval work is planned rather than discovered when a machine falls out of compliance. Central scheduling gives a head office one consistent view of due dates across every state.
Inspect, test & certify
Each MEWP is inspected and, where warranted, load and stability tested and — on insulated units — dielectrically tested, then certified to the Australian regime with defects rated by severity.
Report for head office
Documentation records the Australian compliance outcome in a form that also reads clearly against ISO/ANSI MEWP categories, so a central asset system stays accurate.
Compliance & Standards
In Australia a MEWP is an EWP: the machines are designed to AS/NZS 1418.10 and used, sited, maintained and inspected under AS 2550.10, within the broader AS 2550 series. International MEWP terminology from ISO and ANSI describes the same equipment, but the compliance obligations that apply on Australian sites are the Australian ones. Routine and annual inspections keep the fleet safe between deeper checks, and a major inspection falls due at the interval set by the relevant standard and equipment class — commonly 5-year or 10-year depending on equipment type and duty. We certify to the Australian framework and will not imply an overseas standard substitutes for it. For a fleet manager reconciling records across regions, the risk is subtle but real: an assumption that an overseas inspection interval or classification carries over to Australia can leave a machine out of compliance without anyone noticing until an audit or an incident. Mapping the fleet to the Australian regime explicitly, and keeping the due dates current, removes that ambiguity and keeps every unit insurable wherever in the country it is working.
Why EWP Australia
- International MEWP terminology mapped cleanly onto Australian EWP compliance
- Whole-fleet due-date scheduling for national and multinational owners
- Inspection, load testing and dielectric testing coordinated under one enquiry
- Documentation that reads for both Australian audits and ISO/ANSI asset systems
- A single view of compliance across a dispersed, multi-state fleet
- Australia-wide mobile field service across every MEWP class
Common Questions
Is a MEWP the same as an EWP?
Yes. MEWP (mobile elevating work platform) is the international term used in ISO and ANSI documents; in Australia the same machines are usually called EWPs or elevated work platforms. The equipment is identical — boom lifts, scissor lifts, vertical mast lifts and truck-mounted platforms — only the terminology and standards framework differ by region. For a business whose procedures were written to international terminology, the important thing is that the machine on the ground is governed by the Australian standards wherever it works here.
Which standards apply to my MEWP fleet in Australia?
On Australian sites the machines are designed to AS/NZS 1418.10 and used, maintained and inspected under AS 2550.10, within the broader AS 2550 series. Wherever your fleet was sourced or however it is classified internationally, it is the Australian standards that govern inspection and certification here, and that is what we certify to. An overseas inspection or classification does not substitute for the Australian requirement, so mapping each unit onto the local regime is what keeps it genuinely compliant.
We use ISO/ANSI MEWP categories in our asset register — can you work with that?
Yes. That is the point of this page. We map your MEWP classifications onto the Australian framework and produce documentation that records the Australian compliance outcome while remaining legible against your ISO/ANSI categories, so a head office or central asset system stays consistent across regions. That saves your compliance team from having to translate between two vocabularies every time a machine is inspected, and it removes the risk of a unit slipping through a gap between the international and Australian views of the fleet.
Can you handle a national fleet across multiple states?
Yes. EWP Australia operates Australia-wide as a mobile field service, so a national fleet can be inspected wherever its units are based. We coordinate scheduling centrally so due dates across states are managed together rather than site by site, which is exactly what a head office or central asset team needs when it is trying to hold one consistent view of compliance across a dispersed fleet.
How do MEWP groups and types map to what you inspect?
The international MEWP classification broadly splits into vertical platforms (such as scissor and vertical mast lifts) and boom-type platforms (telescopic and articulating), with further distinction by how the machine travels and elevates. In Australian practice these are all EWPs inspected under AS 2550.10; we simply confirm which category each of your units falls into so the inspection scope suits the machine and the documentation lines up with the MEWP terminology your asset register already uses.
Do you certify imported MEWPs before they go to work?
We inspect and certify MEWPs to the Australian regime regardless of where they were sourced. Before an imported unit goes to work on an Australian site it should be inspected and certified against AS 2550.10 and AS/NZS 1418.10, so that its compliance is established locally rather than assumed from an overseas record. As an Australia-wide mobile field service we can carry this out wherever the unit lands or is commissioned. To arrange this, call 0416 689 689, or email info@ewpaustralia.com.au.
You May Also Need
Use Our Free Calculators
Quick tools to help you plan, compare options, and assess compliance requirements.
National Infrastructure Support
Reliable fleet access and major inspection services for government, defence, and top-tier contractors.