Manitou Telehandler & Access Inspections & Sales
Manitou is best known here for telehandlers, along with access platforms seen on construction, civil and rural sites. Independently we inspect, service, repair and load-test Manitou machines, keeping each one safe, capable and compliant wherever it was bought.
We are no Manitou dealer or authorised service agent for Manitou, and we will not hint that we are. What we bring is impartial know-how across the boom, attachment and load-management systems that let a telehandler lift safely. Manitou units appear in the fleets we service and the stock we sell, with a Manitou MT 1840 telehandler kept in our own hire fleet.
Manitou Capabilities
EWP Australia is an independent specialist — not a dealership. These are the Manitou services we coordinate nationally.
Periodic & annual inspections
Manitou telehandlers and access platforms inspected to AS 2550.10, with the boom, hydraulics, controls, safety systems and load-management functions assessed and logged.
Major inspections at ten years
For older Manitou plant we organise the strip-down, structural testing and recertification that falls due at ten years under the AS 2550.10 framework.
NDT & load testing
Crack testing of Manitou boom sections, pins and welds, plus load and stability trials confirming the machine still lifts to the rated capacity shown on its chart.
Repairs & scheduled servicing
Impartial mechanical, hydraulic and electrical repair of Manitou equipment, plus planned maintenance that holds uptime high between inspections.
Trading & pre-purchase inspections
We trade used Manitou machines and issue impartial pre-purchase condition reports, so any purchase reflects the machine's genuine wear and compliance standing.
Manitou Ranges We See
MT telescopic handlers
Telehandlers such as the MT 1840 that lift and place loads at height on construction, civil and industrial sites via a telescopic boom.
Rotating telehandlers
Slewing telehandlers that rotate the boom to place loads without repositioning the machine, used where access is constrained.
Access platforms
Manitou aerial work platforms for elevated access on maintenance and construction tasks.
Telehandler attachments
Forks, buckets, jibs and platforms that change what a Manitou machine can lift, each affecting the safe working load.
Inspection & Service Notes
- Telehandler booms rely on wear pads, extension components and the boom slide surfaces, which are inspected for wear and correct adjustment through the working range.
- The attachment carriage, quick-hitch and locking systems are checked so attachments are secured and rated correctly for each task.
- Load-management and stability systems, including the load chart and any overload sensing, are verified as part of assessing a machine for safe lifting.
- Where a platform attachment is fitted, the machine is treated as elevating personnel and the associated safety functions are inspected accordingly.
Manitou: An Inspector's Guide
Independent, non-dealer guidance on how we approach Manitou equipment and how owners can plan maintenance and inspections.
Manitou is read first and foremost as lifting plant. The MT telescopic handlers and rotating models that dominate the brand's Australian presence spend most of their lives placing loads, and even with a work platform fitted they behave like a telehandler, not a scissor lift. That framing drives everything an inspector does with the machine.
We assess each Manitou against its plate, logbook and load chart, then work through the boom, carriage and stability systems that decide whether a lift is safe. Where a platform attachment is fitted the machine also comes into scope as elevating work, and we inspect it on both fronts.
What Inspectors Focus On
- Boom wear pads, extension components and slide surfaces through the full working range, since telehandler booms carry their load a long way out.
- The attachment carriage, quick-hitch and locking system, so every attachment is secured and rated correctly for the task.
- Load-management and overload sensing verified against the machine's load chart, because a telehandler's safe capacity changes with reach and attachment.
- On rotating models, the slew ring, rotation controls and outrigger stability system that let the machine place loads without repositioning.
Maintenance Planning Notes
- Treat a Manitou as lifting equipment in your maintenance planning; the load chart, carriage and stability systems deserve the same discipline as the engine and driveline.
- Keep an accurate attachment register — forks, buckets, jibs and platforms each change the safe working load, and a mismatched attachment is a common finding.
- Where a Manitou carries a work platform, plan its inspection as elevating work as well as lifting work, so both duty types are covered.
- Plan the machine's major inspection around its build date under the AS 2550.10 framework rather than waiting for a fault to force downtime.
Is a Manitou telehandler inspected as an EWP or as lifting plant?
Primarily as lifting plant. The boom, wear pads, attachment carriage, quick-hitch locking and the load-management system against the load chart are the core of the assessment. Only when a work-platform attachment is fitted does the machine also come into scope as elevating personnel, and then we inspect the platform's safety functions as well.
Why does the attachment on our Manitou matter so much at inspection?
Because the safe working load of a telehandler is not a single number — it changes with the attachment fitted and how far the boom is extended. Forks, a bucket, a jib or a platform each read differently on the load chart. We check that every attachment is correctly rated, secured and locked, and that the load-management system responds as it should.
Common Questions
Are you an authorised Manitou dealer or service agent?
No. Manitou machines are ones we inspect, repair, service and load-test, then trade, as an independent specialist on Manitou plant; with no dealership or authorised-agent standing behind us, and our assessments of your Manitou stay strictly objective.
Do you inspect Manitou telehandlers as well as access platforms?
Yes. We inspect and service both, covering the boom, attachment carriage, load-management and safety systems to AS 2550.10, with everything recorded in the logbook.
Can you check a used Manitou before I purchase it?
Yes. Our impartial pre-purchase inspections take in any Manitou machine, including its current inspection status and whether a major is coming due. Call 0416 689 689 to book one.
Do you have a Manitou available?
A Manitou MT 1840 telehandler sits in our hire fleet at present, with other Manitou units moving through sale stock. Call 0416 689 689 to check what is free and to arrange hire.
National Infrastructure Support
Reliable fleet access and major inspection services for government, defence, and top-tier contractors.